Acrylic paste ( insert) in the bath : a description of the installation technology

Overhaul in the bathroom is quite costly and time consuming affair.But what to do, if not the time nor the means to carry out repairs there, and bath looks very much not attractive.This problem is now solved simply, thanks to the emergence of modern innovative technologies.Thanks to them, you can update the bath, it is not resorting to its dismantling and destroying the finish in the bathroom.Such restoration can be performed in several ways:

• Enameling inner surface of the bath.
• for coating liquid acrylic.
• Installation of acrylic liner.

The first two of these methods baths updates are too time-consuming and labor investments.Installing the liner today quite allows complete restoration in a short time and get a great result.

What is the essence of the method and what is its technology implementation

What is acrylic insert (insert) in the bathroom: a description of the installation of its technology old plumbing fixtures - the purpose of this article.This technology is very popular all over the world.It involves placing a special bath in the old liner made from acrylic and repeats its shape.It is fixed in the cast-iron construction with an adhesive.

Manufacturing inserts made of highly durable two-layer polymer.The upper layer thereof is made of acrylic, which has superior performance characteristics and lower plastic capable of withstanding the rather serious load on all axes.This insert allows you to completely renovate the bath without using time-consuming disassembly of the product.The finished product has a thickness of 4 to 6 mm and can be made of almost any color.What is particularly good, Acrylic liners for bathtubs are very practical and do not require special care.Wash can be mild soap.They are not affected by dirt and rust.If suddenly there will be a scratch, they can easily be using special polishing agents to eliminate.However, acrylic afraid of abrasives and corrosive agents.

In addition, acrylic insert popularized thanks:

• Democratic pricing manufacturing firms.
• quick and easy installation.
• superior design updated plumbing.
• longer than the period of operation.

• fully convey all the cast iron bathtubs acrylic dignity.
• perfectly retain heat.
• characterized by good strength and sufficient heat resistance.

How to choose the right insert

begin the process of restoration of the old baths is necessary to select the acrylic inserts.To avoid mistakes, we must carefully perform all measurements for which the selected liner size.We are measuring the width and length on top of the inside of the tub.If measurements are made on the bottom, they may turn out not to be entirely accurate due to the different product configurations.The depth should be determined at the lower drain holes.Based on the measurement data can be selected acrylic insert into the bath, which meets all the necessary parameters.

Phased installation manual insertion of acrylic

installation of production technology rather elementary, therefore everyone can perform independently.Before they begin the installation, you should be prepared adhesive to secure the acrylic liner in the old cast iron bath.This is a special two-component foam, which is acquired together with an insert, but at an additional cost.Starting any installation of acrylic liners to prepare the iron surface.

Preparation of iron base for proper installation of the acrylic liner

preparatory stage of work before the actual installation of the insert must be done in sequence.

1. First remove the cast iron tub near the wall the whole tile, plastic or other panels and completely cleaned of debris all the workspace.
2. inner surface of the iron bath is necessary to clean up the coarse sandpaper or other abrasive material, perhaps even with the grinder attachment, to give some of the old enamel surface roughness.It must be used to improve the adhesion of foam prepared with the old surface of the bath.
3. then required to dismantle the drain hole and the siphon.At the same time adjacent crossbar should be removed gently, but do not beat.
4. Next is the liberation of the overflow channel and the main nut is removed.
5. Here in a place overflowing need to pay special attention to the type of available thread to later properly install the adapter itself and a new nut.
6. final stages of completion of the stripping bath should be considered as field training actions for further work.The inner surface of the bath should be qualitatively cleaned of debris, dust and grease different alcohol, acetone or white spirit.

Setting liner

When the bath is fully ready for installation, it is necessary to pay close attention to the process of adjustment.Start it from the edges.For this operation, carefully insert is placed in the bath, circled the perimeter of a pencil.Then, once the plastic is removed and cut jigsaw.After that, scheduled seats overflow and drain.To do this as accurately as possible, in a cast iron bath hole edges rubbed liberally pencil and pressed with the power to sack him.These impressions are drilled crown required diameter.

Actually, the entire installation of the acrylic liner in the bath is a consolidation of it in the old cast iron construction.For this purpose, the perimeter around the bath from above and all the discharge holes silicone sealant is applied, so that moisture can not penetrate into the space between the walls of the insert and acrylic.All the remaining surface of the structure is filled with foam.It is necessary to apply a continuous coating, otherwise skipping acrylic places eventually start to sag, and crack may occur.Box installed in its place and is very tightly to the iron bath.Then set the siphon and fittings, which it holds.At the end of a bath is filled completely with water and so is left for a day.The water level for a couple of centimeters should not get overflow.If the water does not pour, the foam is simply to raise the liner and all the work will come to nothing.

Restored sanitary equipment handy combines all the advantages of cast iron and acrylic bathtubs.The same result is obtained by the reduction of "pouring" acrylic.But when choosing between the two options should take into account that the insert can be inserted without any problems on their own, if done according to the instructions, but the second option in most cases require the participation of experts or deeper knowledge.In any case, correctly restored bath is likely to be long to please you with its appearance and excellent performance.