Outdoor Tiles - how a pavement ?

What criteria selected outdoor tiles?

Even indoor yard in autumn exposed to dampness.This fog, and a high level of moisture in the air, it also happens that a heavy wind blowing raindrops under the canopy.Therefore, outdoor tiles in the first place should be water resistant.And with an eye on winter frost yet.What is expressed in these qualities?

no secret that the tile is made from materials that are in varying degrees, have hygroscopic properties, ie absorb water from the air .And how many cycles of absorption and release of moisture resistant material, so he and resistant to water element.Another thing is resistant to low temperatures, which is directly related to the hygroscopic property.

When moisture penetrates into the interior structure of the artificial material, it fills all the available pores and, during freezing there converted into ice.Then, while raising the temperature, the water thawed and released from the tiles by evaporation.Again, the material to frost resistance depends on how many cycles of freezing and thawing of water absorbed by it will withstand.

should also pay attention to the strength of the tiles, which depends on the thickness, density, material and component composition.Logically, and water absorption depends on the density.As you can see in any quality of material is almost always intertwined and should pay attention to all of the features in the complex.

How reliable tile for street?

Since presumably paving will run you, not a specialist (saving for the budget and gaining valuable experience), it is not recommended to choose glazed tiles.Working with her is much more complicated than usual, due to inexperience may appear chips.The rest of you can take whatever you like paving material, as long as it was a floor stoneware tiles for the street, and not that which trim the floor and walls in the rooms.

Since the fundamental criterion for selection will be, in addition to performance, and even the price, clinker tiles are unlikely to come into the number of preference.Select tiles with high wear resistance, which is calculated in units of 1 to 5. highest hardness of the material corresponds to 10, with this characteristic is determined by what minerals street ceramic tile may be damaged.

However, the durability of the paving is dependent not only on the quality of the material, but also on how well it is laid on the surface and some with the help of which is fixed.For example, many masters are inclined to believe that the concrete base for the paving is not always justified, is much more reliable simple soil and sand cushion.And to some extent this is true, because when strong frosts can crack concrete, due to soil freezing, the sand is particularly well compacted, only reliable prihvatyvaet tile.

As laid granite tiles for the street?

If in the area you plan to smooth the track, they should be marked using pegs and string stretched over them.However, someone like asymmetrical path, the width of which is "playing" pretty much, in this case, do all in the eyes.In order to get a high quality track on the already landscaped area, remove the entire area of ​​its future turf.

In the resulting deepening further remove the soil, taking into account how Pavement tiles will be oriented.If you want to do paving, a parallel track, the ground shovel to both edges, so that the center of the track up on them for a couple of centimeters.When paving is diagonal with respect to the track length, then the ground select the one hand, to bias was 3.2 degrees to the right or left.Under curb dig trenches at the same stage.

All work on the paving done in clear weather, when the forecast for several days ahead promises rain.

I must say that slab granite is ideal for the street, it is strong and durable, but it is put in the concrete, and all of its properties are significantly deteriorated.For walkways pillow under paving executed thickness up to 15 cm of coarse sand, which is carefully watered for full shrinkage before beginning work.By drying pillows she poured a new layer on top, this time with a mixture of dry sand with cement.It tiles banal way hammered with a rubber hammer.

If the path is planned to pass on a vehicle, even if it is electric car for a garden plot, the pillow should be as thorough.A recess in the ground do a little deeper than the pedestrian version, about 25 centimeters, and the pillow is created from compacted gravel 15 centimeters thick, which is the top layer of sand poured desyatisantimetrovyh also trambuemym.Further tiling outside is the same as for a pedestrian walkway, a mixture of sand and cement.

Along the edges of the track, it is desirable to make a border to the result of your work is not raspolzsya after the first rain.The role of borders can play a drainage linear drains, they will provide additional protection against scour track rainfall or meltwater.If the paving runs along the walls of the house, you need to put in a corner between a special concrete or stone plinth, so that water from the wall does not come under the tile.