Putting a nice night light at home

The idea №1 - projector "Starry sky»

So, the very first version of the luminaire - star projector from banks and a flashlight with batteries.This option is suitable for both home-made children's room and bedroom.To make the night light starry sky with your hands, to start the following materials:

• glass jar with a lid (it is desirable to find a bottle in the shape of a cylinder, instead of the normal "pot-bellied");
• sheet of heavy foil;
• flashlight with batteries;
• scissors;
• awl.

idea is - you have to cut the foil height jar, make a hole in it over the entire area and placed into the container.After that, the bank needs to put the included flashlight and homemade star nightlight ready, you can turn it on at night and enjoy the atmosphere in the style of "space".

By the way, a very important point - in the night sky kids love to look at the constellation of the Big and Little Dipper.It would be nice to make a hole in the foil, these two constellations, to a homemade projector is displayed on the ceiling of the most recognizable constellation for the child.Make space more like a night light starry sky can be present, if the holes in the foil to break under the scheme arrangement of stars:

There is an easier way to make a stellar night light in the nursery with his own hands - using the most ordinary tin can.All you need - clean the surface of the jar labels, painted in the appropriate color and make a hole with an awl.After that, inside the bank, you can either put a flashlight with batteries included, or even just put a lighted candle.The last option will create a romantic atmosphere in the bedroom.Ready nightlight should look something like the picture:

idea №2 - LED lamp

view Worth another interesting master class with photo examples to assemble an improvised night-light from the LEDs.In order to make a beautiful lamp in the nursery you should prepare the following materials:

• two clear plastic tubes of different diameters;
• LEDs suitable brightness and color;
• large tube;
• glass pebbles;
• piece of wire;
• glue;
• pliers;
• board LEDs;

So, to guide the description was understandable for you, we will give step by step, how to make a night light from scrap materials.

1. Using pliers, bend the ends of LED bulbs, as shown in the photo.
2. Connect all LEDs with a piece of wire in parallel.Pay attention to the polarity.
3. Connect the two ends of the wire to the finished board.
4. including the executive part of the night-light and see how it works.If the bulb will warm up, add a resistor chain.
5. Glue the smaller diameter tube into one that more.
6. In the void pour decorative glass balls.
7. Put the cork with LEDs on the receiver.If the cork diameter is greater than the tube, we are sure to make a seal (can be from a leather strap, pasted inside, as shown in the photo).
8. Turn ready LED luminaire.

Here on this simple technology can make the LED nightlight in the nursery with his hands.As you can see, everything is quite simple and does not require the creation of more than half an hour.

idea №3 - lamp out of the jar

Well, the last of the original master classes on manufacturing nightlight from scrap materials - using banks of tea.In this case, you can make a beautiful night light in the home, which is suitable for a child's room.

So, first prepare the following materials:

• jar from under the tea original form;
• sheet of scrap paper size banks;
• sheet of cardboard;
• stationery knife;
• acrylic paint;
• piece of sandpaper;
• superglue;
• masking tape;
• cartridge for light bulbs;
• incandescent lamp;
• power cord;
• switch.

Again, it will be more convenient to provide step by step instructions for assembling an improvised night-light in the home.

1. Cut paper for scrapbooking sheet of suitable size to be able to fully wrap the jar.If you chose to scrap paper with a pattern immediately note an important point - the top of a lamp will bottom banks.
2. Remove the cover from the banks, lean it on a sheet of paper, a pencil and cut out the circle office knife.
3. Carved pattern place on the bank in the right place (in the future it will be a window).Masking tape attach the paper and draw an oval pencil.
4. Cut according to markings window, as shown in the photo.
5. sandpaper smooth out the edges.
6. Once again, using the oval template leaning against it to a sheet of cardboard and draw.After that, draw an oval in the strip, as shown in the photo, and cut another maker homemade nightlight in the nursery.
7. From inside the cardboard stick to the pot.
8. exterior garnish bank, using their imagination.You can make a beautiful lamp, decorate it with acrylic paints, paper, or even thread.
9. On the back of the night light, cut a hole for the power cord.
10. Cut a hole in the lid of the jar under the lamp holder.
11. Gather in one chain cartridge with a bulb, switch and electric plug.
12. Secure cartridge in the bank and screw a light bulb.
13. ready Collect night light for children's and check its performance.Ideally, it should turn out like this:

That's the instructions for assembling a homemade lamp for the child.As you can see from the materials at hand, you can even make yourself a beauty at home, there is a will and a little imagination!

Creative video examples

And finally I would like to give you the original ideas for the production of a lamp with his hands at home.In the video you can see how to make a beautiful night light from scrap materials.

WordPress Photo Gallery Plugin

As you can see, there are many original ideas on creating stylish lamp not only for the children's room, and bedroom.We hope you liked the options granted, and now you know how to make a night-light with their own hands at home!

Related items:

• How to mirror lighting in the bathroom
• How to build a solar panel in
• home How to make LED spotlight with his hands